User's Manual

Page | 40
GXW450X User Manual
Version 1.0.0.6
from the RADIUS server. If “EAP-TLS” or “EAP-PEAPv0/MSCHAPv2” is used as the 802.1X mode, users
will also need to upload 802.1X CA Certificate and 802.1X Client Certificate, which should be also
generated from the RADIUS server.
Table 8: GXW450X Network Settings802.1X
802.1X Mode
Select 802.1X mode. The default setting is "Disable". The supported
802.1X mode are:
• EAP-MD5
• EAP-TLS
• EAP-PEAPv0/MSCHAPv2
Identity
Enter 802.1X mode Identity information.
MD5 Password
Enter 802.1X mode MD5 password information.
802.1X CA Certificate
Upload 802.1X CA certificate. This file will be renamed as
"8021x_ca_cert" automatically.
802.1X Client Certificate
Upload 802.1X client certificate with both certificate and private key.
This file will be renamed as "8021x_client_cert" automatically.
Static Routes
The GXW450X provides users static routing capability that allows the device to use manually configured
routes, rather than information only from dynamic routing or gateway configured in the GXW450X Web
GUISystem SettingsNetwork SettingsBasic Settings to forward traffic. It can be used to define a
route when no other routes are available or necessary.
• Click on to create a new IPv4 static route or click on
to create a new IPv6 static route. The configuration parameters are listed in the table below.
• Once added, users can select to edit the static route.
• Select to delete the static route.
Table 9: GXW450X Network SettingsStatic Routes
Destination
Configure the destination IPv4 address or the destination IPv6 subnet
for the GXW450X to reach using the static route.
Example:
IPv4 address - 192.168.66.4