User's Manual
Table Of Contents
- CHANGE LOG
- WELCOME
- GATEWAY GXW450X OVERVIEW
- GETTING STARTED
- SYSTEM STATUS
- SYSTEM SETTINGS
- TRUNKS
- PBX SETTINGS
- MAINTENANCE
- CDR (Call DETAIL RECORD)
- EXPERIENCING THE GXW450X SERIES DIGITAL GATEWAY
Page | 45
GXW450X User Manual
Version 1.0.0.6
The following table shows a sample current service status running on the GXW450X.
Table 11: GXW450X Static DefenseCurrent Service
Port Process Type
8088 asterisk TCP/IPv4
25 master TCP/IPv4
7777 Asterisk TCP/IPv4
7681 pbxmid TCP/IPv4
4520 asterisk UDP/IPv4
4569 asterisk UDP/IPv4
5000 asterisk UDP/IPv4
67 udhcpd UDP/IPv4
69 udpsvd UDP/IPv4
80 lighttpd TCP/IPv6
8888 pbxmid TCP/IPv6
8089 lighttpd TCP/IPv6
4569 asterisk UDP/IPv6
Under "Custom Firewall Settings", users could create new rules to accept, reject or drop certain traffic
going through the GXW450X. To create new rule, click on "Create New Rule" button and a new window
will pop up for users to specify rule options.
Right next to "Create New Rule" button, there is a checkbox for option "Reject Rules". If it’s checked, all
the rules will be rejected except the firewall rules listed below. In the firewall rules, only when there is a
rule that meets all the following requirements, the option "Reject Rules" will be allowed to check: