User's Manual
Table Of Contents
- CHANGE LOG
- WELCOME
- GATEWAY GXW450X OVERVIEW
- GETTING STARTED
- SYSTEM STATUS
- SYSTEM SETTINGS
- TRUNKS
- PBX SETTINGS
- MAINTENANCE
- CDR (Call DETAIL RECORD)
- EXPERIENCING THE GXW450X SERIES DIGITAL GATEWAY
Page | 50
GXW450X User Manual
Version 1.0.0.6
Figure 27: Fail2Ban Settings
Table 15: Fail2Ban Settings
Global Settings
Enable Fail2Ban
Enable Fail2Ban. The default setting is disabled. Please make sure
both "Enable Fail2Ban" and "Asterisk Service" are turned on to use
Fail2Ban for SIP authentication on the GXW450X.
Banned Duration
Configure the duration (in seconds) for the detected host to be banned.
The default setting is 600. If set to 0, the host will be always banned.
Max Retry Duration
Within this duration (in seconds), if a host exceeds the max times of
retry as defined in "MaxRetry", the host will be banned. The default
setting is 600.
MaxRetry
Configure the number of authentication failures during "Max Retry
Duration" before the host is banned. The default setting is 5.