User's Manual

Page | 51
GXW450X User Manual
Version 1.0.0.6
Fail2Ban Whitelist
Configure IP address, CIDR mask or DNS host in the whitelist.
Fail2Ban will not ban the host with matching address in this list. Up to
20 addresses can be added into the list.
Local Settings
Asterisk Service
Enable Asterisk service for Fail2Ban. The default setting is disabled.
Please make sure both "Enable Fail2Ban" and "Asterisk Service" are
turned on to use Fail2Ban for SIP authentication on the GXW450X.
Listening Port Number
Configure the listening port number for the service. By default, port
5060 will be used for UDP and TCP, and port 5061 will be used for TLS.
MaxRetry
Configure the
number of authentication failures during "Max Retry
Duration" before the host is banned. The default setting is 10. Please
make sure this option is properly configured as it will override the
"MaxRetry" value under "Global Settings".
Login Attack Defense
Enables defense against excessive login attacks to the GXW450X’s
web GUI.
The default setting is disabled.
Listening Port Number
This is the Web GUI listening port number which is configured under
System SettingsHTTP ServerPort. The default is 8089.
MaxRetry
When the number of failed login attempts from an IP address exceeds
the MaxRetry number, that IP address will be banned from accessing
the Web GUI. The default setting is 5
Blacklist
Black List
Users will be able to view the IPs that have
been blocked by
GXW450X.
SSH Access
SSH switch is available via Web GUI. User can enable or disable SSH access directly from Web GUI or
LCD screen. For web SSH access, please log in GXW450X web interface and go to Web GUISystem
SettingsSecurity SettingsSSH Access. By default, SSH access is disabled for security concerns. It
is highly recommended to only enable SSH access for debugging purpose.