User's Manual
Table Of Contents
- CHANGE LOG
- WELCOME
- GATEWAY GXW450X OVERVIEW
- GETTING STARTED
- SYSTEM STATUS
- SYSTEM SETTINGS
- TRUNKS
- PBX SETTINGS
- MAINTENANCE
- CDR (Call DETAIL RECORD)
- EXPERIENCING THE GXW450X SERIES DIGITAL GATEWAY
Page | 67
GXW450X User Manual
Version 1.0.0.6
Figure 41: Digital Port Configuration
The GXW450X currently supports E1, T1 and J1 digital hardware type. When different signaling is
selected for E1, T1 or J1, the settings in basic options and advanced options will be different. The
following tables list all the settings to configure digital ports when selecting each signaling.
Table 22: Digital Hardware Configuration Parameters: E1 – PRI_NET/PRI_CPE
Basic Settings
Clock
All E1/T1/J1 spans generate a clock signal on their transmit side. The
parameter determines whether the cloc
k signal from the far end of the
E1/T1/J1 is used as the master source of clock timing. If the far end is