User's Manual

Page | 76
GXW450X User Manual
Version 1.0.0.6
Framing
Select “esf” or “d4”. Default setting is esf.
Advanced Settings
Switch Type
Select switch type.
• EuroISDN: EuroISDN (common in Europe)
• NI2: National ISDN type 2 (common in the US)
• DMS100: Nortel DMS100
• 4ESS: AT&T 4ESS
• 5ESS: Lucent 5ESS
• NI1: old national ISDN type 1
• Q.SIG
PRI Dial Plan
This setting is used to specify the type of the callee number. The service
provider will usually verify this. The default setting is "unknown". In some
very unusual circumstances, you may need set to "Dynamic" or
"Redundant".
Note:
When one type is selected, you might not be able to dial another class of
numbers. For example, if "National" is configured, you won't be able to dial
local or international numbers.
PRI Local Dial Plan
This setting is used to
specify the type of the caller number. The service
provider will usually verify this.
International Prefix
National Prefix
Local Prefix
Private Prefix
Unknown Prefix
Configure the prefix in PRI Local Dial Plan and PRI Dial Plan for each
type.
PRI T310
Configure PRI T310 Timer (in seconds). The default value is 10 seconds.
PRI Indication
Select the PRI Indication.
• outofband: Use RELEASE, DISCONNECT or other messages with
CAUSE to indicate call progress (e.g., cause: unassigned number or
user busy).
• inband: use in-
band tones to play busy or congestion signal to the