User's Manual

Page | 85
GXW450X User Manual
Version 1.0.0.6
interval (in seconds) of the SIP OPTIONS message sent to the device to
check if the device is still online. The default setting is 60 seconds.
Maximum Number of Call
Lines
The maximum number of concurrent calls using the trunk. The default
settings 0, which means no limit.
SRTP
Enable SRTP for the VoIP trunk.
The default setting is "No".
Outbound Routes
An outbound route is a set of rules defined by privileges and patterns that the gateway uses to decide the
numbers that can go out through the trunk, who has the right to use the trunk and trunk to use for an
outbound call.
To create an outbound route, Go to Web GUI TrunksOutbound Routes.
• Click on to add a new outbound route.
• Click on to edit the outbound route.
• Click on to delete the outbound route.
On the GXW450X, the outbound route priority is based on “Best matching pattern”. For example, the
GXW450X has outbound route A with pattern 1xxx and outbound route B with pattern 10xx configured.
When dialing 1000 for outbound call, outbound route B will always be used first. This is because pattern
10xx is a better match than pattern 1xxx. Only when there are multiple outbound routes with the same
pattern configured, the GXW450X will use the first pattern matched.
Figure 43: Create Outbound Route