User's Manual

Page | 87
GXW450X User Manual
Version 1.0.0.6
digit should be stripped before the call is placed.
Prepend
Specify the digits to be prepended before the call is placed via the trunk.
Those digits will be prepended after the dialing number is stripped.
Use Failover Trunk
Trunk
Failover trunks can be used to make sure that a call goes through an
alternate route, when the primary trunk is busy or down. If "Use Failover
Trunk" is enabled and "Failover trunk" is defined, the calls that cannot be
placed via the regular trunk may have a secondary trunk to go through.
GXW450X support up to 10 failover trunks.
Example: The user's primary trunk is a VoIP trunk and the user would like
to use the PSTN when the VoIP trunk is not available. The PSTN trunk
can be configured as the failover trunk of the VoIP trunk.
Strip
Allows the user to specify the number of digits that will be stripped from
the beginning of the dialed string before the call is placed via the selected
trunk.
The users will dial 9 as the first digit of a long-distance calls. However, 9
should not be sent out via digital lines and the PSTN line. In this case, 1
digit should be stripped before the call is placed.
Example:
Prepend
Specify the digits to be prepended before the call is placed via the trunk.
Those digits will be prepended after the dialing number is stripped.
Time Condition
Time Condition Mode
Use Main Trunk or Failover Trunk: Use the Main Trunk and its settings
during the configured time conditions. If the main trunk is unavailable, the
Failover Trunk and its settings will be used instead.
Use Specific Trunks: Use specific trunks during the configured time
conditions. The Strip and Prepend settings of the Main Trunk will be used.
If a trunk is unavailable during its time condition, no failover trunks will be
used.
Time Condition
Users could customize holiday time, office time or a specified time to allow