User's Manual
Table Of Contents
- CHANGE LOG
- WELCOME
- GATEWAY GXW450X OVERVIEW
- GETTING STARTED
- SYSTEM STATUS
- SYSTEM SETTINGS
- TRUNKS
- PBX SETTINGS
- MAINTENANCE
- CDR (Call DETAIL RECORD)
- EXPERIENCING THE GXW450X SERIES DIGITAL GATEWAY
Page | 91
GXW450X User Manual
Version 1.0.0.6
PBX SETTINGS
This section describes internal options that haven't been mentioned in previous sections yet. The settings
in this section can be applied globally to the GXW450X, including general configurations, jitter buffer, RTP
settings and hardware config. The options can be accessed via Web GUIPBX SettingsGeneral
Settings.
SIP Settings
The GXW450X SIP global settings can be accessed via Web GUIPBX SettingsSIP Settings.
General
On this page users can define the Binding UDP Port for SIP protocol. The default port used is 5060
Figure 46: SIP Settings/General
Misc
On this Web page users can define the DNS mode used by the GXW450X. This setting only affects the
DNS queries that occurs when making calls.
Figure 47: SIP Settings/Misc