User's Manual

Page | 93
GXW450X User Manual
Version 1.0.0.6
TLS Bind IPv6 Address
Configure the IPv6 address for TLS server to bind to. "[::]" means bind to
all interfaces. The port number is optional with default being 5061. For
example, [2001:0DB8:0000:0000:0000:0000:1428:00
00]:5061. Note: The
IP address must match the common name (host name) in the certificate
so that the TLS socket won't bind to multiple IP addresses.
TLS Do Not Verify
If enabled, the TLS server's certificate won't be verified when acting as a
client. The default setting is "Yes".
TLS Self-Signed CA
This is the CA certificate if the TLS server being connected to requires
self-
signed certificate, including server's public key. This file will be
renamed as "TLS.ca" automatically.
Note:
The size of the uploaded ca file must be under 2MB.
TLS Cert
This is the Certificate file (*.pem format only) used for TLS connections. It
contains private key for client and signed certificate for the server. This file
will be renamed as "TLS.pem" automatically.
Note:
The size of the uploaded certificate file must be under 2MB.
TLS Key
The size of a private key must be under 2MB. This is the private key (*.key
format only) for TLS connections.
This file will be renamed as "TLS.key" automatically.
TLS CA Cert
This file
must be named with the CA subject name hash value. It contains
CA's (Certificate Authority) public key, which is used to verify the accessed
servers.
Note:
The size of the uploaded CA certificate file must be under 2MB.
TLS CA List
Display a list of files under the CA Cert directory.
Note:
The configuration in this section requires system reboot to take effect.