User Manual

P a g e | 273
UCM6200 Series User Manual
Version 1.0.16.20
Figure 181: Configure Extension First Name and Last Name
1. Name
Enter a Name to identify the Dial by Name group.
2. Extension
Configure the direct dial extension for the Dial By Name group.
3. Available Extensions/Selected Extensions
Select available extensions from the left side to the right side as the directory for the Dial By Name group.
Only the selected extensions here can be reached by the Dial By Name IVR when dialing into this group.
The extensions here must have a valid first name and last name configured under Web
GUIExtension/TrunkExtensions in order to be searchable in Dial By Name directory through IVR. By
specifying the extensions here, the administrators can make sure unscreened calls will not reach the
company employee if he/she does not want to receive them directly.
4. Prompt Wait Time
Configure “Prompt Wait Time” for Dial By Name feature. During Dial By Name call, the caller will need to
input the first letters of First/Last name before this wait time is reached. Otherwise, timeout will occur and
the call might hang up. The timeout range is between 3 and 60 seconds.
5. Query Type
Specify the query type. This defines how the caller will need to enter to search the directory.
By First Name: enter the first 3 digits of the first name to search the directory.
By Last Name: enter the first 3 digits of the last name to search the directory.
By Full Name: enter the first 3 digits of the first name or last name to search the directory.
6. Select Type
Specify the select type on the searching result. The IVR will confirm the name/number for the party the caller
would like to reach before dialing out.