User Manual
P a g e | 79
UCM6200 Series User Manual
Version 1.0.16.20
Office Time
On the UCM6200, the system administrator can define "office time", which can be used to configure time
condition for extension call forwarding schedule and inbound rule schedule. To configure office time, go to Web
GUISystem SettingsTime SettingsOffice Time. Click on "Create New Office Time" to create an office
time.
Figure 45: Create New Office Time
Table 18: Create New Office Time
Start Time
Configure the start time for office hour.
End Time
Configure the end time for office hour
Week
Select the work days in one week.
Show Advanced Options
Check this option to show advanced options. Once selected, please
specify "Month" and "Day" below.
Month
Select the months for office time.
Day
Select the work days in one month.
Select "Start Time", "End Time" and the day for the "Week" for the office time. The system administrator can also
define month and day of the month as advanced options. Once done, click on "Save" and then "Apply Change"
for the office time to take effect. The office time will be listed in the web page as the figure shows below.