Data sheet

P a g e | 133
UCM6200 Series User Manual
Version 1.0.19.27
• Specific time can be configured on the bottom of the extension configuration
dialog. Scroll down the add Time Condition for specific time.
Office Time and Holiday could be configured on page System Settings→Time
Settings→Office Time/Holiday page.
DND Whitelist
If DND is enabled, all calls to this extension will be rejected except the numbers listed
on this list.
Note: The maximum number on the Whitelist is 10.
FWD Whitelist
If call forward is enabled, all calls to this extension will be forwarded except the calls
coming from the specified numbers on this list.
Note: The Maximum number on the whitelist is 10.
CC Settings
Enable CC
If enabled, UCM6200 will automatically alert this extension when a called party is
available, given that a previous call to that party failed for some reason. By default,
it’s disabled.
CC Mode
Two modes for Call Completion are supported:
• Normal: This extension is used as ordinary extension.
• For Trunk: This extension is registered from a PBX.
The default setting is “Normal”.
CC Max Agents
Configure the maximum number of CCSS agents which may be allocated for this
channel. In other words, this number serves as the maximum number of CC requests
this channel can make. The minimum value is 1.
CC Max Monitors
Configure the maximum number of monitor structures which may be created for this
device. In other words, this number tells how many callers may request CC services
for a specific device at one time. The minimum value is 1.
Ring Simultaneously
Ring
Simultaneously
Enable this option to have an external number ring simultaneously along with the
extension. If a register trunk is used for outbound, the register number will be used to
be displayed for the external number as caller ID number.
External Number
Set the external number to be rang simultaneously. ‘-’ is the connection character
which will be ignored.
This field accepts only letters, numbers, and special characters + = * #.