Data sheet

P a g e | 136
UCM6200 Series User Manual
Version 1.0.19.27
SIP/IAX Password
Configure the password for the user. A random secure password will be automatically
generated. It is recommended to use this password for security purpose.
Voicemail
Configure Voicemail. There are three valid options and the default option is "Enable
Local Voicemail".
• Disable Voicemail: Disable Voicemail.
• Enable Local Voicemail: Enable voicemail for the user.
Voicemail
Password
Configure voicemail password (digits only) for the user to access the voicemail box.
A random numeric password is automatically generated. It is recommended to use
the random generated password for security purpose.
Skip Voicemail
Password
Verification
When user dials voicemail code, the password verification IVR is skipped. If enabled,
this would allow one-button voicemail access. By default, this option is disabled.
Disable This
Extension
If selected, this extension will be disabled on the UCM6200.
Note:
The disabled extension still exists on the PBX but can’t be used on the end device.
User Settings
First Name
Configure the first name of the user. The first name can contain characters, letters,
digits and _.
Last Name
Configure the last name of the user. The last name can contain characters, letters,
digits and _.
Email Address
Fill in the Email address for the user. Voicemail will be sent to this Email address.
User Password
Configure the password for user portal access. A random numeric password is
automatically generated. It is recommended to use the randomly generated password
for security purpose.
Language
Select the voice prompt language to be used for this extension. The default setting is
"Default" which is the selected voice prompt language under Web GUI→PBX
Settings→Voice Prompt→Language Settings. The dropdown list shows all the
current available voice prompt languages on the UCM6200. To add more languages
in the list, please download voice prompt package by selecting "Check Prompt List"
under Web GUI→PBX Settings→Voice Prompt→Language Settings.
Table 37: IAX Extension Configuration Parameters→Media
IAX Settings
Max Number of
Calls
Configure the maximum number of calls allowed for each remote IP address.
Require Call
Token
Configure to enable/disable requiring call token. If set to "Auto", it might lock out users
who depend on backward compatibility when peer authentication credentials are
shared between physical endpoints. The default setting is "Yes".
SRTP
Enable SRTP for the call. The default setting is disabled.