Data sheet

P a g e | 138
UCM6200 Series User Manual
Version 1.0.19.27
CFN Time
Condition
Select time condition for Call Forward No Answer. The available time conditions are
“Office Time”, “Out of Office Time”, “Holiday”, “Out of Holiday”, “Out of Office Time or
Holiday” and “Specific”.
Notes:
• “Specific” has higher priority to “Office Times” if there is a conflict in terms of time
period.
• Specific time can be configured on the bottom of the extension configuration
dialog. Scroll down the add Time Condition for specific time.
• Office Time and Holiday could be configured on page System Settings→Time
Settings→Office Time/Holiday page.
Call Forward Busy
Configure the Call Forward Busy target number. If not configured, the Call Forward
Busy feature is deactivated. The default setting is deactivated.
CFB Time
Condition
Select time condition for Call Forward Busy. The available time conditions are “Office
Time”, “Out of Office Time”, “Holiday”, “Out of Holiday”, “Out of Office Time or Holiday”
and “Specific”.
Notes:
• “Specific” has higher priority to “Office Times” if there is a conflict in terms of time
period.
• Specific time can be configured on the bottom of the extension configuration
dialog. Scroll down the add Time Condition for specific time.
• Office Time and Holiday could be configured on page System Settings→Time
Settings→Office Time/Holiday page.
Ring Simultaneously
Ring
Simultaneously
Enable this option to have an external number ring simultaneously along with the
extension. If a register trunk is used for outbound, the register number will be used to
be displayed for the external number as caller ID number.
External Number
Set the external number to be rang simultaneously. ‘-’ is the connection character
which will be ignored.
Time Condition for
Ring
Simultaneously
Ring the external number simultaneously along with the extension on the basis of this
time condition.
Other Settings
Ring Timeout
Configure the number of seconds to ring the user before the call is forwarded to
voicemail (voicemail is enabled) or hang up (voicemail is disabled). If not specified,
the default ring timeout is 60 seconds on the UCM6200, which can be configured in
the global ring timeout setting under Web GUI→PBX Settings→Voice
Prompt→Custom Prompt: General Preference. The valid range is between 5 seconds
and 600 seconds.
Note: If the end point also has a ring timeout configured, the actual ring timeout used
is the shortest time set by either device.