Data sheet

P a g e | 200
UCM6200 Series User Manual
Version 1.0.19.27
Inbound Mode Suffix
Dial "Global Inbound Mode feature code + Inbound Mode Suffix" or a route's
assigned suffix to toggle the route's inbound mode.
The BLF subscribed to the inbound mode suffix can monitor the current
inbound mode.
Inbound Multiple Mode
Multiple mode allows user to switch between destinations of the inbound rule
by feature codes. Configure related feature codes as described in [Inbound
Route: Multiple Mode]. If this option is enabled, user can use feature code
to switch between different modes/destinations.
Dial Trunk
This option shows up only when "By DID" is selected. If enabled, the external
users dialing in to the trunk via this inbound route can dial outbound call using
the UCM’s trunk.
Privilege Level
This option shows up only when "By DID" is selected.
• Disable: Only the selected Extensions or Extension Groups are
allowed to use this rule, when enabled Filter on Source Caller ID.
• Internal: The lowest level required. All users are allowed to use this
rule, check this level might be risky for security purpose.
• Local: User with Local level, National or International level are
allowed to use this rule.
• National: Users with National or International Level are allowed to
use this rule.
• International: The highest level required. Only users with
international level are allowed to use this rule.
Allowed DID Destination
This option shows up only when "By DID" is selected. This controls the
destination that can be reached by the external caller via the inbound route.
The DID destination are:
• Extension
• Conference
• Call Queue
• Ring Group
• Paging/Intercom Groups
• IVR
• Voicemail Groups
• Fax Extension
• Dial By Name
• All