Data sheet

P a g e | 236
UCM6200 Series User Manual
Version 1.0.19.27
A new language option will be displayed after successfully installed. Users then could select it to apply in the
UCM6200 system voice prompt or delete it from the UCM6200.
Customize Specific Prompt
On the UCM6200, if the user needs to replace some specific customized prompt, the user can upload a single
specific customized prompt from Web GUI→PBX Settings→Voice Prompt→Language Settings instead of the
entire language pack.
Figure 146: Upload Single Voice Prompt for Entire Language Pack
User Name Prompt Customization
There are two ways to customize/set new user name prompt:
Upload User Name Prompt File from Web GUI
1. First, Users should have a pre-recorded file respecting the following format:
• PCM encoded / 16 bits / 8000Hz mono.
• In “.GSM” or “.WAV” format.
• File size under 5M.
• Filename must be set as the extension number with 18 characters max. For example, the recorded
file name 1000.wav will be used for extension 1000.
2. Go under web GUI PBX Settings → Voice Prompt → User Name Prompt and click on
button.
3. Select the recorded file to upload it and press Save and Apply Settings.
• Click on to record again the user name prompt.