Data sheet

P a g e | 291
UCM6200 Series User Manual
Version 1.0.19.27
EMERGENCY
UCM supports configuration and management of numbers to be called in emergency situation, thus bypassing
the regular outbound call routing process and allowing users in critical situation to dial out for emergency help
with the possibility to have redundant trunks as point of exit in case one of the lines is down.
Also, the module supports notification for other internal users, thus when someone dials an emergency call (ex:
911) a notification call will be sent to other staff to know about the current situation.
Emergency calls can now be automatically recorded by toggling on the new Auto Record and recordings can be viewed
in the new Emergency Recordings tab on the same page. Additionally, users can have these recordings be sent to the
configured email address(es).
Email alerts are also supported after enabling the notification for the event under “Maintenance → System
Events”
To configure emergency numbers, users need to follow below steps:
1. Navigate on the web GUI under “Call Features → Emergency Calls”
2. Click on to add a new emergency number.
3. Configure the required fields “Name, Emergency Number and Trunk(s) to be used to reach the number”.
4. Save and apply the configuration.