Data sheet

P a g e | 306
UCM6200 Series User Manual
Version 1.0.19.27
Disconnect
• Default code: *0
• Enter the code during active call. It will disconnect the call.
• Options:
Disable
Allow Caller: Enable the feature code on caller side only.
Allow Callee: Enable the feature code on callee side only.
Allow Both: Enable the feature code on both caller and callee.
Call Park
• Default code: #72
• Enter the code during active call to park the call.
• Options:
Disable
Allow Caller: Enable the feature code on caller side only.
Allow Callee: Enable the feature code on callee side only.
Allow Both: Enable the feature code on both caller and callee.
Audio Mix Record
• Default code: *3
• Enter the code followed by # or SEND to start recording the
audio call and the UCM6200 will mix the streams natively on the
fly as the call is in progress.
• Options:
Disable
Allow Caller: Enable the feature code on caller side only.
Allow Callee: Enable the feature code on callee side only.
Allow Both: Enable the feature code on both caller and callee.
Feature Code Digits Timeout
Set the maximum interval (ms) between digits for feature code
activation
DND/Call Forward
Do Not Disturb (DND) Activate
• Default code: *77
Do Not Disturb (DND) Deactivate
• Default code: *78
Call Forward Busy Activate
• Default Code: *90
• Enter the code and follow the voice prompt. Or enter the code
followed by the extension to forward the call.
Call Forward Busy Deactivate
• Default Code: *91
Call Forward No Answer Activate
• Default Code: *92
• Enter the code and follow the voice prompt. Or enter the code
followed by the extension to forward the call.