Data sheet

P a g e | 321
UCM6200 Series User Manual
Version 1.0.19.27
Payload
The UCM6200 payload type for audio codecs and video codes can be configured here.
Table 97: Internal Options/Payload
AAL2-G.726
Configure payload type for ADPCM (G.726, 32kbps, AAL2 codeword packing).
The default setting is 112.
DTMF
Configured payload type for DTMF. The default setting is 101.
G.721 Compatible
Configure to enable/disable G.721 compatible. The default setting is Yes.
G.726
Configure the payload type for G.726 if "G.721 Compatible" is disabled. The
default setting is 111.
iLBC
Configure the payload type for iLBC. The default setting is 97.
H.264
Configure the payload type for H.264. The default setting is 99.
H.265
Configure the payload type for H.264. The default setting is 114.
H.263P
Configure the payload type for H.263+. The default setting is 100 103.
VP8
Configure the payload type for VP8. The default settings is 108.
PBX Settings/Voice Prompt Customization
Record New Custom Prompt
In the UCM6200 Web GUI→PBX Settings→Voice Prompt→Custom Prompt page, click on “Record New
Custom Prompt” and follow the steps below to record new IVR prompt.
Figure 216: Record New Custom Prompt
1. Specify the IVR file name.
2. Select the format (GSM or WAV) for the IVR prompt file to be recorded.
3. Select the extension to receive the call from the UCM6200 to record the IVR prompt.