Data sheet
Table Of Contents
- DOCUMENT PURPOSE
- CHANGE LOG
- Firmware Version 1.0.19.27
- Firmware Version 1.0.19.21
- Firmware Version 1.0.18.13
- Firmware Version 1.0.18.12
- Firmware Version 1.0.18.9
- Firmware Version 1.0.17.16
- Firmware Version 1.0.16.20
- Firmware Version 1.0.16.18
- Firmware Version 1.0.15.16
- Firmware Version 1.0.14.24
- Firmware Version 1.0.14.23
- Firmware Version 1.0.14.21
- Firmware Version 1.0.13.14
- Firmware Version 1.0.12.19
- Firmware Version 1.0.11.27
- Firmware Version 1.0.0.7
- WELCOME
- PRODUCT OVERVIEW
- INSTALLATION
- GETTING STARTED
- SYSTEM SETTINGS
- PROVISIONING
- EXTENSIONS
- EXTENSION GROUPS
- ANALOG TRUNKS
- VOIP TRUNKS
- SLA STATION
- CALL ROUTES
- CONFERENCE
- VIDEO CONFERENCE
- IVR
- LANGUAGE SETTINGS FOR VOICE PROMPT
- VOICEMAIL
- RING GROUP
- PAGING AND INTERCOM GROUP
- CALL QUEUE
- PICKUP GROUPS
- MUSIC ON HOLD
- FAX SERVER
- BUSY CAMP-ON
- PRESENCE
- FOLLOW ME
- SPEED DIAL
- DISA
- EMERGENCY
- CALLBACK
- BLF AND EVENT LIST
- DIAL BY NAME
- ACTIVE CALLS AND MONITOR
- CALL FEATURES
- PBX SETTINGS
- SIP SETTINGS
- IAX SETTINGS
- INTERFACE SETTINGS
- API Configuration
- CTI SERVER
- ASTERISK MANAGER INTERFACE (RESTRICTED ACCESS)
- CRM INTEGRATION
- PMS INTEGRATION
- WAKEUP SERVICE
- ANNOUNCEMENTS CENTER
- STATUS AND REPORTING
- USER PORTAL
- MAINTENANCE
- EXPERIENCING THE UCM6200 SERIES IP PBX
P a g e | 47
UCM6200 Series User Manual
Version 1.0.19.27
Figure 8: UCM6200 Setup Wizard
Users can disable the Extension Range during configuration on the Extensions.
During the wizard, the user can quit the setup wizard at any time to start over with manual configuration. At the
last step of the wizard, the user will be provided with summary for review, before the configuration is loaded.
Once the setup is completed, the system is ready to go.
Web GUI Configurations
There are eight main sections in the Web GUI for users to view the PBX status, configure and manage the PBX.
• System Status: Displays PBX status, System Status, Active calls and network status.
• Extension/Trunk: To configure extensions, trunks and manage inbound/outbound call routes.
• Call Features: To Configure call features such as ring groups, call queues, IVR ...Etc
• PBX Settings: Extension ranges, SIP Settings, interfaces settings and MOH.
• System Settings: To configure user management, network settings, firewall settings, change password,
LDAP Server, HTTP Server, Email Settings, Time Settings, NTP server and login timeout.
• Maintenance: To perform firmware upgrade, backup configurations, cleaner setup, reset/reboot, syslog
setup and troubleshooting.
• CDR: View call statistics and download CDR and call recordings.
• Value-added Features: Zero Config, enable CTI server, CRM, PMS WebRTC.