Data sheet

P a g e | 51
UCM6200 Series User Manual
Version 1.0.19.27
TLS Cert
Upload certificate for the built-in http server and override the existing one.
Note: The size of your certificate must be under 2MB. This is the certificate
file (*.pem format only) for TLS connection and it will be renamed as
"certificate.pem" automatically. It contains private key for the client and
signed certificate for the server.
Domain
Enter the domain name from which to request certificate files then press
on in order to request the files.
Once the change is saved, the web page will be redirected to the login page using the new URL. Enter the
username and password to login again.
Network Settings
After successfully connecting the UCM6200 to the network for the first time, users could login the Web GUI and
go to System Settings→Network Settings to configure the network parameters for the device.
• UCM6200 supports Route/Switch/Dual mode functions.
In this section, all the available network setting options are listed for all models. Select each tab in Web
GUI→System Settings→Network Settings page to configure LAN settings, WAN settings, 802.1X and Port
Forwarding.
Basic Settings
Please refer to the following tables for basic network configuration parameters on UCM6202, UCM6204 and
UCM6208 respectively.
Table 7: UCM6200 Network Settings→Basic Settings
Method
Select "Route", "Switch" or "Dual" mode on the network interface of UCM6200. The default
setting is "Route".
• Route
WAN port interface will be used for uplink connection. LAN port interface will be used
to serve as router.
• Switch
WAN port interface will be used for uplink connection. LAN port interface will be used
as room for PC connection.
• Dual
Both ports can be used for uplink connection. Users will need assign LAN 1 or LAN 2
as the default interface in option "Default Interface" and configure "Gateway IP" for
this interface.
MTU
Specifies the Maximum Transmission Unit. (By default, its 1500)