Data sheet

P a g e | 64
UCM6200 Series User Manual
Version 1.0.19.27
Table 11: UCM6200 System Settings→Network Settings→OpenVPN®
Enable
Enable / Disable the OpenVPN feature.
Configuration
Method
Select OpenVPN configuration method.
Manual Configuration: Allows to configure OpenVPN settings manually.
Upload Configuration File: Allows to upload. ovpn and .conf files to the UCM
and to automatically configure OpenVPN settings.
OpenVPN®
Server Address
Configures the hostname/IP and port of the server. For example: 192.168.1.2:22
OpenVPN®
Server Protocol
Specify the protocol user, user should use the same settings as used on the
server
OpenVPN®
Device mode
Use the same setting as used on the server.
Dev TUN: Create a routed IP tunnel.
Dev TAP: Create an Ethernet tunnel.
OpenVPN® Use
Compression
Compress tunnel packets using the LZO algorithm on the VPN link. Don’t enable
this unless it is also enabled in the server config file.
OpenVPN®
Encryption
Algorithm
Specify the cryptographic cipher. Users should make sure to use the same
setting that they are using on the OpenVPN server.
OpenVPN® CA
Cert
Upload as SSL/TLS root certificate. This file will be renamed as ‘ca.crt’
automatically.
OpenVPN®
Client Cert
Upload a client certificate. This file will be renamed as ‘cliend.crt’ automatically.
OpenVPN®
Client Key
Upload a client private key. This file will be renamed as ‘client.key’ automatically.