Data sheet

P a g e | 82
UCM6200 Series User Manual
Version 1.0.19.27
Time settings
Auto time updating
The current system time on the UCM6200 can be found under Web GUI→System Status→Dashboard→PBX
Status.
To configure the UCM6200 to update time automatically, go to Web GUI→System Settings→Time
Settings→Auto Time Updating.
----------------------------------------------------------------------------------------------------------------------------- ----------------------
Note:
The configurations under Web GUI→Settings→Time Settings→Auto Time Updating page require reboot to
take effect. Please consider configuring auto time updating related changes when setting up the UCM6200 for
the first time to avoid service interrupt after installation and deployment in production.
--------------------------------------------------------------------------------------------------------------------------------------------------
Table 17: Time Auto Updating
Remote NTP Server
Specify the URL or IP address of the NTP server for the UCM6200 to
synchronize the date and time. The default NTP server is
ntp.ipvideotalk.com.
Enable DHCP Option 2
If set to "Yes", the UCM6200 can get provisioned for Time Zone from
DHCP Option 2 in the local server automatically. The default setting is
"Yes".
Enable DHCP Option 42
If set to "Yes", the UCM6200 can get provisioned for NTP Server from
DHCP Option 42 in the local server automatically. This will override the
manually configured NTP Server. The default setting is "Yes".
Time Zone
Select the proper time zone option so the UCM6200 can display correct
time accordingly.
If "Self-Defined Tome Zone" is selected, please specify the time zone
parameters in "Self-Defined Time Zone" field as described in below option.
Self-Defined Time Zone
If "Self-Defined Time Zone" is selected in "Time Zone" option, users will
need define their own time zone following the format below.
The syntax is: std offset dst [offset], start [/time], end [/time]
Default is set to: MTZ+6MDT+5,M4.1.0,M11.1.0