Data sheet

P a g e | 84
UCM6200 Series User Manual
Version 1.0.19.27
NTP Server
The UCM6200 can be used as a NTP server for the NTP clients to synchronize their time with. To configure the
UCM6200 as the NTP server, set "Enable NTP server" to "Yes" under Web GUI→System Settings→Time
Settings→NTP Server. On the client side, point the NTP server address to the UCM6200 IP address or host
name to use the UCM6200 as the NTP server.
Office Time
On the UCM6200, the system administrator can define "office time", which can be used to configure time
condition for extension call forwarding schedule and inbound rule schedule. To configure office time, go to Web
GUI→System Settings→Time Settings→Office Time. Click on "Create New Office Time" to create an office
time.
Figure 45: Create New Office Time
Table 18: Create New Office Time
Start Time
Configure the start time for office hour.
End Time
Configure the end time for office hour