User Manual

P a g e | 138
UCM6200 Series User Manual
Version 1.0.15.16
Hotline
Enable Hotline
If enabled, hotline dialing plan will be activated, a pre-configured number will be used
according to the selected Hotline Type.
Hotline Number
Configure the Hotline Number
Hotline Type
Configure the Hotline Type:
• Immediate Hotline:
When the phone is off-hook, UCM6200 will immediately dial the preset number
• Delay Hotline:
When the phone is off-hook, if there is no dialing within 5 seconds, UCM6200 will
dial the preset number.
Other Settings
Ring Timeout
Configure the number of seconds to ring the user before the call is forwarded to
voicemail (voicemail is enabled) or hang up (voicemail is disabled). If not specified,
the default ring timeout is 60 seconds on the UCM6200, which can be configured in
the global ring timeout setting under Web GUIPBX SettingsVoice
PromptCustom Prompt: General Preference. The valid range is between 5 seconds
and 600 seconds.
Note: If the end point also has a ring timeout configured, the actual ring timeout used
is the shortest time set by either device.
Auto Record
Enable automatic recording for the calls using this extension. The default setting is
disabled. The recording files can be accessed under Web GUICDRRecording
Files.
Skip Trunk Auth
• If set to “Yes”, users can skip entering the password when making outbound calls.
• If set to “By Time”, users can skip entering the password when making outbound
calls during the selected time condition.
• If set to “No”, users will be asked to enter the password when making outbound
calls.
Time Condition for
Skip Trunk Auth
If “Skip Trunk Auth” is set to “By Time”, select a time condition during which users can
skip entering password when making outbound calls.
Dial Trunk
Password
Configure personal password when making outbound calls via trunk.
Enable LDAP
If enabled, this extension will be added to LDAP Phonebook PBX list; if disabled, this
extension will be skipped when creating LDAP Phonebook.
Music On Hold
Select which Music On Hold class to suggest to extension when putting the active call
on hold.
Call Duration Limit
Configure the maximum duration of call-blocking.