User Manual

P a g e | 144
UCM6200 Series User Manual
Version 1.0.15.16
• Allow All
Device in any network can register this extension.
• Local Subnet Only
Only the user in specific subnet can register this extension. Up to three subnet
addresses can be specified.
• A Specific IP Address
Only the device on the specific IP address can register this extension.
The default setting is "Allow All".
Skip Trunk Auth
If enable “All”, users do not need to enter password when making an outbound call.
If enable “Follow Me”, the call can dial out via follow me without password.
Codec Preference
Select audio and video codec for the extension. The available codecs are: PCMU,
PCMA, GSM, AAL2-G.726-32, G.722, G.729, G.723, iLBC, ADPCM, LPC10, H.264,
H.263, H.263p and VP8.
Search and Edit Extension
All the UCM6200 extensions are listed under Web GUIExtension/TrunkExtensions, with status, Extension,
CallerID Name, Technology (SIP, IAX and FXS), IP and Port. Each extension has a checkbox for users to "Modify
Selected Extensions" or "Delete Selected Extensions". Also, options "Edit” , "Reboot" and "Delete"
are available per extension. User can search an extension by specifying the extension number to find an
extension quickly.
Figure 86: Manage Extensions
• Status
Users can see the following icon for each extension to indicate the SIP status.
Green: Idle
Blue: Ringing