User Manual

P a g e | 188
UCM6200 Series User Manual
Version 1.0.15.16
Figure 118: CSV File Successful Upload
Inbound Routes
Inbound routes can be configured via Web GUIExtension/TrunkInbound Routes.
• Click on to add a new inbound route.
• Click on "Blacklist" to configure blacklist for all inbound routes.
• Click on to edit the inbound route.
• Click on to delete the inbound route.
Inbound Rule Configurations
Table 59: Inbound Rule Configuration Parameters
Trunks
Select the trunk to configure the inbound rule.
Pattern
• All patterns are prefixed with the "_".
• Special characters:
X: Any Digit from 0-9.
Z: Any Digit from 1-9.
N: Any Digit from 2-9.
".": Wildcard. Match one or more characters.
"!": Wildcard. Match zero or more characters immediately.
Example: [12345-9] - Any digit from 1 to 9.
• The pattern can be composed of two parts, Pattern and CallerID Pattern. The
first part is used to specify the dialed number while the second part is used to
specify the caller ID and it is optional, if set it means only the extension with
the specific caller ID can call in or call out. For example, pattern
'_2XXX/1234' means the only extension with the caller ID '1234' can use this
rule.