User Manual

P a g e | 189
UCM6200 Series User Manual
Version 1.0.15.16
Notes:
▪ Multiple patterns can be used. Each pattern should be entered in new line.
▪ Users can add comments to a dial plan by typing “/*” and “*/” before and after
each comment respectively.
▪ Example:
Pattern
CallerID Pattern
_X.
_NNXXNXXXXX /* 10-digit long distance */
_818X. /* Any number with leading 818 */
1000
1001
Disable This Route
After creating the inbound route, users can choose to enable and disable it. If the
route is disabled, it will not take effect anymore. However, the route settings will
remain in UCM. Users can enable it again when it’s needed.
Prepend Trunk Name
Prepend trunk name to display.
Alert-Info
Configure the Alert-Info, when UCM6200 receives an INVITE request, the Alert-Info
header field specifies an alternative ring tone to the UAS.
Inbound Multiple
Mode
Multiple mode allows user to switch between destinations of the inbound rule by
feature codes. Configure related feature codes as described in [Inbound Route:
Multiple Mode]. If this option is enabled, user can use feature code to switch
between different destinations.
Default Destination
Select the default destination for the inbound call.
• Extension
• Voicemail
• Conference Room
• Queue
• Ring Group
• Paging/Intercom
• Voicemail Group
• Fax
• DISA
• IVR
• Dial by Name
• External Number
• By DID
When "By DID" is used, the UCM6200 will look for the destination based on the
number dialed, which could be local extensions, conference, call queue, ring
group, paging/intercom group, IVR, voicemail groups and Fax extension as
configured in "DID destination". If the dialed number matches the DID pattern,
the call will be allowed to go through.