User Manual

P a g e | 190
UCM6200 Series User Manual
Version 1.0.15.16
Strip
Configure the number of digits to be stripped from the beginning of the DID. This
option shows up only when "By DID" is selected.
Prepend
Configure the number of digits to be prepended to an inbound DID pattern, with
strip taking precedence over prepend.
Dial Trunk
This option shows up only when "By DID" is selected. If enabled, the external users
dialing in to the trunk via this inbound route can dial outbound call using the
UCM6200’s trunk.
DID Destination
This option shows up only when "By DID" is selected. This controls the destination
that can be reached by the external caller via the inbound route. The DID
destination are:
• Extension
• Conference
• Call Queue
• Ring Group
• Paging/Intercom Groups
• IVR
• Voicemail Groups
• Fax Extension
• Dial by Name
• All
Time Condition
Time Conditions
Select the time condition for the inbound rule.
Destination
Select the destination for the inbound call during the specified time condition.
Inbound Route: Prepend Example
UCM6200 now allows user to prepend digits to an inbound DID pattern, with strip taking precedence over
prepend. With the ability to prepend digits in inbound route DID pattern, user no longer needs to create multiple
routes for the same trunk to route calls to different extensions. The following example demonstrates the process:
1. If Trunk provides a DID pattern of 18005251163.
2. If Strip is set to 8, UCM6200 will strip the first 8 digits.
3. If Prepend is set to 2, UCM6200 will then prepend a 2 to the stripped number, now the number become
2163.
4. UCM6200 will now forward the incoming call to extension 2163.