User Manual
P a g e | 288
UCM6200 Series User Manual
Version 1.0.15.16
SIP Settings/SIP Trunk Prompt Tone
SIP Trunk Prompt Tone tab has been added to the UCM to help user choose which prompt will be played by
the UCM during call failure, the following voice message responses have been added and can be set to play
for 4XX, 5XX, and 6XX call failures:
• Default for 404 and 604 status codes: “Your call can’t be completed as dialed. Please check the number
and dial again.”
• Default for 5xx status codes: “Server error. Please check your device.”
• Default for 403 and 603 status codes: “The call was rejected by the server. Please try again later.”
• Default for all other status codes: “All circuits are busy now. Please try again later.”
Additionally, custom voice messages recorded and uploaded in PBX SettingsVoice PromptCustom
Prompt can be used for these failure responses instead of the default messages.
Figure 187: SIP Trunk Prompt Tone