User Manual

P a g e | 358
UCM6200 Series User Manual
Version 1.0.15.16
Table 122: Ethernet Capture
Interface Type
Select the network interface to monitor.
Enable SFTP Data Sync
Check this box to save the capture files in the SFTP server.
Please make sure the configuration of data synchronization works
before.
Storage to External Device
Check this box to activate storage of the capture either on the
USB or SD Card.
Capture Filter
Enter the filter to obtain the specific types of traffic, such as (host,
src, dst, net, proto…).
Start
Click to start the trace.
Stop
Click to stop the trace.
Download
Click to download the trace if trace is stored locally.
The output result is in .pcap format. Therefore, users could specify the capture filter as used in general network
traffic capture tool (host, src, dst, net, protocol, port, port range) before starting capturing the trace.
IP Ping
Enter the target host in host name or IP address. Then press "Start" button. The output result will dynamically
display in the window below.
Figure 264: Ping