User Manual

P a g e | 361
UCM6200 Series User Manual
Version 1.0.15.16
Figure 267: A Key Dial-up FXO
Note: When using a Key Dial-up FXO feature the outbound trunk for the analog trunk need to have internal
permission. As well as it should be the trunk with the highest outbound route priority.
After capturing the trace, users can download it for basic analysis. Or you can contact Grandstream
Technical support in the following link for further assistance if the issue is not resolved.
http://www.grandstream.com/index.php/support
Service Check
Enable Service Check to periodically check UCM6200. Check Cycle is configurable in seconds and the default
setting is 60 sec. Check Times is the maximum number of failed checks before restart the UCM6200. The default
setting is 3. If there is no response from UCM6200 after 3 attempts (default) to check, current status will be
stored and the internal service in UCM6200 will be restarted.
Figure 268: Service Check
Network Status
In UCM6200 Web GUISystem StatusNetwork Status, the users can view active Internet connections. This
information can be used to troubleshoot connection issue between UCM6200 and other services.