User Manual

P a g e | 56
UCM6200 Series User Manual
Version 1.0.15.16
Table 10: UCM6200 System SettingsNetwork SettingsOpen VPN
Enable
Enable / Disable the open VPN feature.
Server Address
Configures the hostname/IP and port of the server. For example: 192.168.1.2:22
Server Protocol
Specify the protocol user, user should use the same settings as used on the
server
Device Mode
Use the same setting as used on the server.
Dev TUN: Create a routed IP tunnel.
Dev TAP: Create an Ethernet tunnel.
User
Compression
Compress tunnel packets using the LZO algorithm on the VPN link. Don’t enable
this unless it is also enabled in the server config file.
CA Cert
Upload as SSL/TLS root certificate. This file will be renamed as ‘ca.crt’
automatically.
Client Cert
Upload a client certificate. This file will be renamed as ‘cliend.crt’ automatically.
Client Key
Upload a client private key. This file will be renamed as ‘client.key’ automatically.
Figure 24: Open VPN feature on the UCM6200