User Manual

P a g e | 95
UCM6200 Series User Manual
Version 1.0.15.16
Uploading Devices List
Besides the built-in discovery method on the UCM, users could prepare a list of devices on .CSV file and upload it by
clicking on the button , after which a success message prompt should be displayed.
Users need to make sure that the CSV file respects the format as shown on the following figure and that the entered
information is correct (valid IP address, valid MAC address, device model ..etc), otherwise the UCM will reject the file
and the operation will fail:
Figure 66: Device list - CSV file sample
Managing discovered devices:
• Sorting: Press or to sort per MAC Address, IP Address, Version, Vendor, Model or Create
Config columns from lower to higher or higher to lower respectively.
• Filter: Select a filter to display corresponding results.
▪ All: Display all discovered devices.
▪ Scan Results: Display only manually discovered devices. [Discovery]
▪ IP Address: Enter device IP and press Search button.
▪ MAC Address: Enter device MAC and press Search button.
▪ Model: Enter a model name and press Search button. Example: GXP2130.
Figure 67: Managing Discovered Devices