User Manual

P a g e | 97
UCM6200 Series User Manual
Version 1.0.15.16
Select the checkbox on the left of the parameter you would like to configure to active the dropdown list for this
parameter.
Figure 68: Global Policy Categories
The following tables list the Global Policy configuration parameters for the SIP end device.
Table 23: Global Policy ParametersLocalization
Language settings
Language
Select the LCD display language on the SIP end device.
Date and Time
Date Format
Configure the date display format on the SIP end device’s LCD.
Time Format
Configure the time display in 12-hour or 24-hour format on the SIP end device’s
LCD.
NTP Server
Configure the URL or IP address of the NTP server. The SIP end device may
obtain the date and time from the server.
Time Zone
Configure the time zone used on the SIP end device.