Administration Guide

P a g e | 34
WP820 Administration Guide
Version 1.0.5.5
Factory Serial
Number
Factory Serial Number.
Account/General Settings
Account Settings
Account Active
This field indicates whether the account is active.
The default setting is “Yes”. The default value for Account 2 is “No”.
Account Name
Configure the name associated with each account to be displayed on the LCD.
SIP Server
Configures the URL or IP address, and port of the SIP server. This is provided by
your VoIP service provider (ITSP).
Secondary SIP
Server
Configures the URL or IP address, and port of the SIP server. This will be used
when the primary SIP server fails.
SIP User ID
Configures the user account information, provided by your VoIP service provider
(ITSP). It’s usually in the form of digits similar to phone number or actually a phone
number.
SIP Authentication
ID
Configures the SIP service subscriber’s ID used for authentication. It can be
identical to or different from the SIP User ID.
SIP Authentication
Password
Configures the account password required for the phone to authenticate with the
ITSP (SIP) server before the account can be registered. After it is saved, this will
appear as hidden for security purpose.
Display Name
Configures the SIP server subscriber’s name (optional) that will be used for Caller
ID display.
Tel URI
Indicates E.164 number in “From” header by adding “User=Phone” parameter or
using “Tel:” in SIP packets, if the base has an assigned PSTN Number.
• Disabled: Will use “SIP User ID” information in the Request-Line and
“From” header.
• User=Phone: “User=Phone” parameter will be attached to the Request-
Line and “From” header in the SIP request to indicate the E.164 number.
If set to "Enable".
• Enabled: "Tel:" will be used instead of "sip:" in the SIP request.
Please consult your carrier before changing this parameter. Default is Disabled.