Administration Guide

P a g e | 45
WP820 Administration Guide
Version 1.0.5.5
Play Warning Tone for
Auto Answer Intercom
When enabled, the phone will play warning tone when auto answer Intercom. By
default, it’s enabled.
Intercom Barging
Configures whether to answer the incoming intercom call when there is already
an active call on the phone. When "Intercom Barging" is enabled, if the current
active call is an intercom call, the incoming intercom call will be automatically
rejected;
if the current active call is not an intercom call, the current active call will be put
on hold and the incoming intercom call will be automatically answered.
When "Intercom Barging" is disabled, a prompt will show up indicating the
incoming intercom call without interrupting the current active call.
Send Anonymous
Sets the phone to make anonymous outgoing calls; when set to "Yes", the "From"
header in outgoing INVITE messages will be set to anonymous, essentially
blocking the Caller ID to be displayed. The default setting is “No”.
Intercept Anonymous
Calls
Rejects the calls whose SIP INVITE message includes Anonymous information
in from header when enabled. The default setting is “No”.
Call Log
Categorizes the call logs saved for this account. The default setting is “Log All”.
• If it is set to “Log All”, all the call logs of this account will be saved.
• If set to “Log Incoming/Outgoing Calls (Missed Calls Not Record)”, the
whole call history will be saved other than missed call.
• If it is set to “Disable Call All”, none of the call history will be saved.
• If it is set to “Don’t Prompt Missed Call”, the phone will log the missed call
histories, but there is no prompt to indicate the missed calls on phone LCD.
Enable Call Features
Configures the local call features. If set to "Yes", call features (including call
forwarding, DND and etc) will be supported locally instead of using the feature
code supported on SIP server/proxy.
Mute on Answer
Intercom Call
When enabled, phone will set mute feature upon answering incoming intercom
calls. The corresponding P-values for Account1 and Account2 are respectively:
P26071 and P26171 with possible values 0 for ‘OFF’ and 1 for ‘ON’.
Transfer on 3-way
Conference Hangup
Transfers conference from hosted party when hang up, thus other parties can
continue the conference without interruption. The default setting is unchecked.
Use # as Dial Key
Allows users to configure the "#" key as the "Send" key. If set to "Yes", the "#"
key will immediately dial out the input digits. In this case, this key is essentially
equivalent to the "Send" key. If set to "No", the "#" key is treated as part of the
dialed string.