Administration Guide

P a g e | 49
WP820 Administration Guide
Version 1.0.5.5
Caller IDs
Caller ID Display
Specifies which header tag will be used from the SIP INVITE message for the
Caller ID display.
• If it is set to ”Auto”, the phone will use the one of the available headers
in the priority hierarchy of P-Asserted Identify Header, Remote-Party-ID
Header and FROM Header.
• If it is set to “From Header”, it will use the FROM header information for
the Caller ID.
• If it is set to “Disabled”, all the incoming calls Caller ID will be displayed
with “Unavailable”.
The default setting is “Auto”.
Ring Tones
Account RingTone
Allows users to configure the ringtone for the account. Users can choose different
ringtones from the dropdown list.
Note: User can also choose silent ring tone.
Ignore Alert-Info
Header
If checked, configured default ringtone will be played by ignoring Alert-Info
header.
Match Incoming
Caller ID
Specifies matching rules with number, pattern or Alert Info text (up to 3 matching
rules). When the incoming caller ID or Alert Info matches the rule, the phone will
ring with selected distinctive ringtone. Matching rules:
• Specific caller ID number. For example, 8321123;
• A defined pattern with certain length using x and + to specify, where x
could be any digit from 0 to 9. Samples:
xx+ : at least 2-digit number;
xx : only 2-digit number;
[345]xx : 3-digit number with the leading digit of 3, 4 or 5;
[6-9]xx : 3-digit number with the leading digit from 6 to 9.
• Alert Info text
Users could configure the matching rule as certain text (e.g., priority) and
select the custom ring tone mapped to it. The custom ring tone will be
used if the phone receives SIP INVITE with Alert-Info header in the
following format: Alert-Info: <http://127.0.0.1>; info=priority
Selects the distinctive ring tone for the matching rule. When the incoming caller
ID or Alert Info matches one of the 10 rules, the phone will ring with the associated
ringtone