Administration Guide

P a g e | 54
WP820 Administration Guide
Version 1.0.5.5
Default Ringtone
Configures the default ringtone for incoming calls.
Notification Tone
Configures the notification tone for new SMS and voicemails.
Offhook Auto Dial
Configures a User ID/Extension to dial up automatically after the offhook auto dial
delay time ends when the phone is offhook or hands-free. The phone will use the
first account to dial out by default.
Offhook Auto Dial
Delay (s)
Defines the delay time of Offhook Timeout. Once configured Offhook Timeout, the
phone will dial out automatically after the delay time ends. If not configured Offhook
Timeout, there will be no delays and the phone will dial up the User ID/Extension
automatically.
Offhook/Onhook
Timeout (s)
If configured, the phone will exit the dial-up screen when timeout after off hook or
on hook. The valid range is 10-60s.
Off-cradle Pickup
Enables offhook of handset when picked up from cradle.
On-cradle Hangup
Enables onhook of handset when repositioned on cradle.
Number Of Accounts
The Virtual Account
Group Register
Configures the number of concurrent registrations with the main server and
standby server(s), each account supports 1 SIP main server and 4 standby server
registration(s).
Filter Characters
Sets the characters for filter when dial out numbers. Multiple characters could be
set. For example, if set to "[()-]", when dial [phone], the character "()-"
will be filtered and dial 057188008888 directly. The default setting is [()-]
Escape '#' as %23 in
SIP URI
Determines which characters will be included in the SIP INVITE URI if end users
input #. If it is set to “Yes”, the phone will replace the # by %23. Otherwise, it will
include # in the SIP INVITE message. The default setting is “checked”.
Enable noise Shield
Configures whether to enable noise shield feature. If enabled, all the background
noise will be suppressed except the sound from speaker.
Rejected Call
Notification
Specifies whether to enable Rejected calls notification. When enabled, a missed
call notification will prompt on LCD after rejecting an incoming call.
Phone Settings/Ring Tone
CPT Settings
Auto Config CPT by
Region
Configures whether to choose Call Progress Tone automatically by region. If set to
"Yes", the phone will configure CPT (Call Progress Tone) according to different
regions automatically. If set to "No", you can manual configure CPT parameters.
The default setting is "No".