Administration Guide

P a g e | 58
WP820 Administration Guide
Version 1.0.5.5
Multicast settings
Defines paging group. Users can configure whether to use the group for transport,
accept, join group and its label. Only available and joined group will be displayed
in paging group list. If users need send or receive paging, "Transport" and "Accept"
must be enabled for this group.
Multicast Paging Function
Settings
Paging Priority
Active
Determines if a new paging call whose priority is higher than the existing paging
call will be answered. If it is checked, this feature will be enabled.
The default setting is disabled.
Paging Barge
If enabled, during active call, if incoming multicast paging has higher priority (1 is
the highest) than this value, the call will be put on hold and multicast paging will
be played.
Default setting is “Disabled”.
Note: The option is displayed if “Paging Priority Active” is enabled.
Multicast Paging
Codec
Selects the codec type for the multicast paging call. The list includes: PCMU,
PCMA, G.722, G.726-32, G.729A/B, iLBC, Opus. The default setting is “PCMU”.
Multicast Channel Settings
Multicast Paging
Function
Enable or disable multicast paging.
Multicast Paging
Address
Set multicast paging address for sending and receiving. This option requires
reboot to take effect. Valid range is from 224.0.0.0 to239.255.255.255. User can
enter up to 10 Multicast paging addresses.
Phone Settings/Wallpaper Setting
WP820 wallpaper is customizable through web GUI and the user can upload up to 10 wallpapers.
Note:
WP820 support JPG, PNG, BMP format, size ≤ 2MB (Best Pixel: 240 * 320px)