Administration Guide

P a g e | 61
WP820 Administration Guide
Version 1.0.5.5
OpenVPN® Mode
Simple mode only supports some basic or common parameters configuration;
Professional mode supports configuration file upload in zipped format, which is
totally customized by need, please refer to https://openvpn.net for more
information.
Enable OpenVPN®
Comp-lzo
Enables/disables the LZO compression. When LZO compression is enabled on
the OpenVPN server, this option needs to be checked otherwise there will be a
network connection failure. The P-value for this functionality is P8508 with two
possible values 0 and 1; 0 – OFF/1 - ON. Default setting is NO.
OpenVPN® Server
Address
Defines the URL/IP address for the OpenVPN® server.
OpenVPN® Port
Defines the network port for the OpenVPN® server. The default setting is 1194.
OpenVPN®
Transport
Determines network protocol used for OpenVPN® (UDP or TCP).
The default setting is TCP.
OpenVPN® CA
OpenVPN® CA file (ca.crt) required by the OpenVPN® server for authentication
purposes. Press "Upload" to upload the corresponding file to the device.
OpenVPN® Client
Certificate
OpenVPN® CA file (ca.crt) required by the OpenVPN® server for authentication
purposes. Press "Upload" to upload the corresponding file to the device.
OpenVPN® Client
Key
OpenVPN® Client key (*.key) required by OpenVPN® server for authentication
purposes. Press "Upload" to upload the corresponding file to the device.
OpenVPN® Cipher
Method
The cipher method of OpenVPN®, must be the same cipher method used by the
OpenVPN® server. Supported methods are: Blowfish, AES-128, AES-256 and
Triple-DES.
OpenVPN®
Username
Configures the OpenVPN® authentication username (optional).
OpenVPN®
Password
Configures the OpenVPN® authentication password (optional).
Network Settings/Advanced Network Settings
Preferred DNS 1
Defines the secondary DNS IP address if the static IP is used
Preferred DNS 2
Configures the secondary alternate DNS IP address to failover during both: the
default DNS server and alternate DNS server’s outage.