Administration Guide

P a g e | 66
WP820 Administration Guide
Version 1.0.5.5
Screen Lock
Password
Add new digit password, edit current password and it displays the current screen
lock password.
System Settings/Preferences
LCD & LED Management
Enable Missed Call
Indicator
When “checked", the LED indicator on the upper right corner of the phone will light
up when there is missed call on the phone.
Enable MWI
Indicator
When “checked", the LED indicator on the upper right corner of the phone will light
up when there is new voicemail on the phone
Enable New
Message Indicator
Turns on the LED indicator at device’s upper right corner when there are unread
Messages. If it set to “checked”, the LED indicator will keep off if the phone has
new messages. Otherwise, the LED indicator will be turned on. Default setting is
"checked".
Enable Keypad
Backlight
When “checked", the backlight will light up when the button is pressed. Default
setting is "checked".
Brightness
Configures the Brightness of LCD backlight.
Timeout
Sets the timeout interval of the LCD backlight. If timeout is set to ‘never’, the screen
will always stay on. The value range is between 15s and 30 minutes.
Gesture Control
Flip phone
Reject incoming call
If set to “Reject”, the phone will reject incoming calls if users flip the phone. If set
to “Reject with SMS”, the phone will reject incoming calls when flipping the phone
and send a pre-configured SMS to the caller. The default setting is “Off”.
Pick up the phone
Ringtone
If set to “Mute”, the ringtone will be muted once users pick up the phone when
receiving an incoming call. If set to “Ringing Down”, the ringtone’s volume will
decrease once the phone is picked up when receiving incoming calls. The default
setting is “Off”.
Alarm Ringtone
If set to “Mute”, the alarm ringtone will be muted once users pick up the phone
during alarm. If set to “Ringing Down”, the alarm ringtone’s volume will decrease
once the phone is picked up during alarm. The default setting is “Off”.