Administration Guide

P a g e | 67
WP820 Administration Guide
Version 1.0.5.5
Button Customization
Soft key
Main Screen Left
Softkey
Configures the function of the left softkey when users are on the Main screen.
Main Screen Center
Softkey
Configures the function of the center softkey when users are on the Main screen.
Main Screen Right
Softkey
Configures the function of the right softkey when users are on the Main screen.
Call Screen Left
Softkey
Configures the function of the left softkey when users are on the Call screen.
Call Screen Center
Softkey
Configures the function of the center softkey when users are on the Call screen.
Call Screen Right
Softkey
Configures the function of the right softkey when users are on the Call screen.
Multi-function Button
PTT/Paging
If “PTT/Paging” is chosen to be the function for Multi-function button, a short press
on the button will take users to PTT/Paging settings. Users can also press and
hold the key to initiate PTT/Paging call.
SAFE/Panic Call
If “SAFE/Panic Call” is configured to be the function for Multi-function button, a
short press on the key will open status page to make sure that Panic Call is
enabled. Users can also press and hold the key to trigger Panic Call.
Mute
If “Mute” is chosen, users will be able to mute incoming calls ringtone by pressing
on the key. Also, the key will be performing mute/unmute function during calls.
Speed Dial
Short press to open status page, long press to dial a contact.
System Settings/TR-069
Enable TR-069
Sets the phone to enable the “CPE WAN Management Protocol” (TR-069). The
default setting is "Yes".