Administration Guide

P a g e | 68
WP820 Administration Guide
Version 1.0.5.5
ACS URL
Specifies URL of TR-069 ACS (e.g., http://acs.mycompany.com), or IP address.
Default setting is https://acs.dgms.cloud
ACS User name
Enters username to authenticate to ACS.
ACS Password
Enters password to authenticate to ACS.
Periodic Inform
Enable
Sends periodic inform packets to ACS.
The default setting is “No”.
Periodic Inform
Interval (s)
Configures to sends periodic “Inform” packets to ACS based on specified interval.
The default setting is 86400.
Connection Request
User name
Enters user name for the ACS to connect to the phone.
Connection Request
Password
Enters password for the ACS to connect to the phone.
Connection Request
Port
Enters the port for the ACS to connect to the phone.
CPE Cert File
Uploads Cert File for the phone to connect to the ACS via SSL.
CPE Cert Key
Uploads Cert Key for the phone to connect to the ACS via SSL.
Maintenance Page Definitions
Maintenance/Upgrade
Firmware
Complete Upgrade
If enabled, all files will be replaced except user data. Default is disabled.
Upload Firmware
File to Update
Allows users to load the local firmware to the phone to update the firmware.
Firmware Upgrade
Mode
Allows users to choose the firmware upgrade method: TFTP, HTTP, HTTPS or
Manual Upload. The default setting is “HTTPS”.
Firmware Server
Path
Sets IP address or domain name of firmware server. The URL of the server that
hosts the firmware release. Default is “fm.grandstream.com/gs”.
HTTP/HTTPS User
Name
Enters the user name for the firmware HTTP/HTTPS server.