Administration Guide

P a g e | 72
WP820 Administration Guide
Version 1.0.5.5
Maintenance/System Diagnosis
Syslog
Syslog Protocol
Select the transport protocol over which log messages will be carried.
• UDP: Syslog messages will be sent over UDP (the default setting).
• SSL/TLS: Syslog messages will be sent securely over TLS connection.
Syslog Level
Selects the level of logging for syslog. The default setting is "None".
There are 4 levels from the dropdown list: DEBUG, INFO, WARNING and
ERROR. The following information will be included in the syslog packet:
• DEBUG (Sent or received SIP messages).
• INFO (Product model/version on boot up, NAT related info, SIP message
summary, Inbound and outbound calls, Registration status change,
negotiated codec, Ethernet link up).
• WARNING (SLIC chip exception).
• ERROR (SLIC chip exception, Memory exception).
Note: Changing syslog level does not require a reboot to take effect.
Syslog Server
Configures the URI which the phone will send the syslog messages to.
The default setting is "log.ipvideotalk.com".
Syslog Keyword
Filter
Only send the syslog with keyword, multiple keywords are separated by comma.
Example: set the filter keyword to “SIP” to filter SIP log.
Logcat
Clear Log
Clears the log files saved in the phone by pressing the clear button.
Log Tag
Configures the filter to display the specified process log file.
Log Priority
Selects the log priority to display. It can be selected from list below:
• Verbose (Default Setting)
• Debug
• Info
• Warn
• Error
• Fatal
• Silent (suppress all output)
Get Log
Get the log files saved in the phone.