FCC GRAND MULTI VIEW USB to VGA/ HDMI Monitor User’s Manual ISSUE: 2008/05/05 P/N: 3449800 CE
1. Package Contents INDEX This package contains the following items： 1. 2. 3. 4. 5. 6. 7. Package Contents……………..…....…………………….. Introduction………………..………..……….……………... System Requirement….…………….…..………………… Product Features…….………….…………….…………... Hardware Overview……………..…………….…………... Installation…………………………..………..……..……… Using the Multi View…...……...…………………….….… 7.1 Using the Multi View DisplayLink Manager..……..…. 7.2 Using More Multi View…...………………………..…. 7.3 Firmware Update……..…..………………………..…. 8.
4. Product Features 6. Installation Step 1: Insert the provided driver CD into your CD-ROM driver, then execute the Setup.exe file and select your language to install. Plug & play. Installs in seconds. Easily connect up to 6 (Windows OS)/ 4 (Mac OS) monitors to one PC through USB 2.0. Supports VGA and HDMI outputs. Supports resolution up to 1600 x 1200 or 1680 x 1050 (32 bit true color).
Screen Resolution: Select the screen resolution (available only in extended mode). Extend to: Reposition the extended screen to the top, bottom, left or right of the primary display. Extend: Set the Multi View to Extended mode. Mirror: Set the Multi View to Mirror mode. You can see the same desktop image on the additional monitor. Color Quality: Select the screen color quality (available only in extended mode).
Off: Disable the Multi View on the system. 7.3 Firmware Update Manually Update Click the Updates → Check Now…, and it will check and download the latest firmware immediately.. NOTE: Confirm that your computer is already connected to the network. Advanced: Directly access the Display Properties. You can also adjust the resolution, color quality, position and refresh rate via the Display Properties.
8. Uninstall the Device Driver 9. Troubleshooting Follow the steps below to uninstall the driver of the Multi View. Step 1: Open the Control Panel: Start → Control Panel → Add or Remove Programs. Situation Step 2: Select USB-VGA-HDMI DisplayLink Adapter and click Remove. Check Point 1. Make sure you restart your computer after the driver installation. The device driver has been installed, but the Multi View is not working 2. Check all the connectors are plugged in correctly. 3.
