User`s guide

9
If you do not see REFRESH RATE under the ADAPTER tab, click
on the MONITOR tab and be sure that the monitor type is set to:
Desktop users: Super VGA 1024x768 (or desired maximum
resolution)
Laptop users: Laptop Display Panel 1024x768 (or equivalent for
your system)
Q & A
Q: How can I enhance the display quality?
A: You can usually decrease the TV contrast and increase
brightness control to get the better picture.
Q: I connect using a NOTEBOOK PC, but no output is displayed on
TV.
A:
To get a converted image on the TV, you must configure the
laptop computer to display an external VGA signal.
Typically, this is done by toggling the "Fn" key + "F1", "F2", etc.
The actual function key varies with each computer.
Please refer to your computer's User's Manual for specific
instructions for displaying an external VGA signal.
The "Fn" + "Fx" toggles between three settings. By default, the
LCS panel is on. The first toggle attempts to power both
the LCD panel and the external signal. Sometimes, laptops do
not have enough power to show both the LCD and the
PC to Video EZ, so only a scrambled signal is viewable on the
TV. The third toggle turn off the LCD panel and shows
only the external display (the TV, in this case).