User`s manual

13
Click on the icon "DISPLAY".
Click on SETTINGS tab.
Click on the button "ADVANCED".
Click on ADAPTER tab.
Change the Refresh Rate from Optimal to ADAPTER DEFAULT or
60Hz and click apply.
If you do not see REFRESH RATE under the ADAPTER tab, click
on the MONITOR tab and be sure that the monitor type is set to:
Desktop users: Super VGA 1024x768 (or desired maximum
resolution)
Laptop users: Laptop Display Panel 1024x768 (or equivalent for
your system)
Q & A
Q: How can I enhance the display quality?
A: You can usually decrease the contrast and increase brightness control to
get the better picture.
Q: I connect using a NOTEBOOK PC, but no output is displayed on TV.
A:
To get a converted image on the TV, you must configure the laptop
computer to display an external VGA signal.
Typically, this is done by toggling the "Fn" key + "F1", "F2", etc. The
actual function key varies with each computer.
Please refer to your computer's User's Manual for specific
instructions for displaying an external VGA signal.
14
The "Fn" + "Fx" toggles between three settings. By default, the LCS
panel is on. The first toggle attempts to power both
the LCD panel and the external signal. Sometimes, laptops do not
have enough power to show both the LCD and the
Ultimate Wireless, so only a scrambled signal is viewable on the TV.
The third toggle turn off the LCD panel and shows
only the external display (the TV, in this case).
Q: I have an older model of a television. Would I be able to use my
video converter with a television as old as this one?
A: Yes, you may need a special adapter called an RF modulator. This
device converts the composite video signal from your video
converter to an Antenna signal, which can be viewed on your TV
using Channel 3 or 4 or 13. You may also use a VCR in some cases.
Refer to section D3 for more information.
Q: Can I use multiple televisions to view the same image from my
computer?
A: Yes, Grand Ultimate Wireless provides 1 CVBS OUT, 1 S-VHS
OUT and 1 RGB OUT. You may connect one television to the next
using a composite video cable or an S-Video between the “VIDEO
IN” and “VIDEO OUT” ports. We recommend using no more than
five or six televisions.
-OR-
Yes, you may purchase additional receivers and transmit to as many
TVs as are in range. For information on purchasing additional