Install Manual

WARNING: To avoid electric shock or ﬁre do not install the projector lift in

wet places.

1. Please read these instructions carefully before installation to avoid damage to the

product caused by inappropriate installation or operation.

2. Please keep the projector lift away from hot sources, such as radiators and heaters,

ﬁreplaces, loudspeakers or similar devices.

3. Plugging in only with ground wire is acceptable.

4. Only accessories from authorised suppliers are acceptable.

5. Please unplug the power during lightning and rain or when the product is not in use

for long periods of time.

6. Please do not attempt repairs yourself – repair work should only be done by a

professional agent.

7. Please use the approved power lead (three-core power lead) provided.

8. Please use the rating (voltage, amps) power lead (three-core power lead).

9. Electrical socket should be installed in a convenient position. If an accident occurs

during operation, please disconnect power by removing the power plug.

10. The ceiling or wall used for installation must be secure – the load-bearing

requirement must be 4 times that of the Projector Lift to prevent it from falling.

CAUTION

Caution

WARNING

To prevent injuries caused by electric shock,

do not remove the cover or any parts.

Users should not check any internal parts.

Please contact an authorized professional

repairman to address any problems.

CAUTION

Be aware of non-

insulated voltage

of spare parts to

prevent danger

from electric shock.

NOTE

Please operate

only according

to this instruction

manual.